Getting Down To Basics with Options

  • admin
  • September 23, 2018
  • Tips to Refinishing Hardwood Floors.

    When you are investing in your floor, it is important to use hardwood flooring materials because of the many benefits, but also there are great responsibilities. The reason why it is great responsibilities because, with time, it can wear off meaning you either need to replace or refinish them. However, you have to define if you need to replace the hardwood flooring materials or the furnish them to restore them to their former glory. When you want to refinish the hardwood floor, you can engage professionals but also it is simple, you can do-it-yourself. Read more below to learn on how to the furnish hardwood floor.

    The first step to refinishing the hardwood floor is by collecting the necessary materials. There are a number of refinishing materials you need to have before you start the process which can include the shop vac, shop rags, sandpapers, stain application pad, furnish foam rollers, oil-based stains and so on. It is possible you don’t understand much about different refinishing materials to purchase, and that is where you can engage a professional for advice. To start the process of, you need to remove objects that are on the floor including carpet tacks and nails.

    The next step to take is to sand the floor using 60 grit sandpaper and the belt sander. The same procedure should be repeated more than once with different sizes of sandpapers and afterward use the shop vac in removing the dust in the debris.

    The step that will follow flow sanding will be water popping. Water popping is meant to get the wood wet to raise the grain. When water is used for after clearing the dust, it is helping the wood in absorbing the stains. In water popping, you will need to dip the rag in water, therefore, using it in wiping the hardwood floor.

    Additionally, you need to for the next step which is selling the floor by using oil-based stains by you choose, you will use the stain applicator pads. After applying the first coating of oil-based things, you should give it 24 to 48 hours to dry up. After the first coating has dried up, you should apply polyurethane using the foam roller of which it takes two hours.

    Now after finishing the coating, it is time to buff the floor using the 220-grit screen. After you are done with the buffing, it is time you apply another coating of the polyurethane of which you follow the same process 3 to 4 times. After you’re done with this process, your floor will be a brand-new. You can discover more on how to maintain hardwood floors after refinishing them because there is a lot of info on the Internet where you can read more about hardwood floors.